Building My Guitar... I'm Fucked

Project 2

Ok so I didn’t wait the 24 hours for it to fully set about 12 hours? Shoot me :D I just wanted to see what it looked like, so off came the masking tape, and this beauty hid behind it, there is quite a few touch ups I need to do with a very fine brush but overall for a first attempt I was really pleased!!! Still have loads to do need to sort the edges out, touch ups then putting a clear glossy coat on top then sanding then electrics in the guitar and bang we should be done :D so I predict funds pending that this guitar should be all done by the end of this month :D *Fingers Crossed*

Project 2

The White base coat has been dry for about 4-5 days now so time to put the Bullseye design on it so first things are first, time to put masking tape on it, the front I had to put strips on so I can cut out the design, the back I just used paper to cover it up, to safe on my masking tape as no design is going on the back!

As compasses are not big enough for my guitar we had to make a make shift one! So we had the screw in the end of the wood worked out where the first circle would be drawn and then drilled a hole every 3cm for the pencil to fit into.